Newest Technology Compressor Hybrid Oil-injected Rotary Screw
Compressor Atlas GA200HYBRID⁺~GA250HYBRID⁺
GA 90
315VSD 20221012.pdf
High reliability, low operating cost
The most direct way to increase profit margins is to reduce
operating expenses. It is well known that energy costs account for
80% of the entire life cycle cost of a compressor. Atlas GA+ series
compressor
The machine is equipped with an intelligent fuel injection system
and an IE4/IE5 motor, which not only reduces the operating cost of
the customer, but also allows the machine to run stably under
severe working conditions.
Efficient
GA+ series compressor adopts intelligent oil injection technology,
IE4/IE5 oil-cooled motor; motor and machine head
One-piece design, protection level up to IP66. Efficient
transmission system, with large margin design
designed cooling system, low pressure drop piping system and the
precise Elektronikon® Touch
The control system can greatly reduce the comprehensive operation
energy consumption of the compressor.
Reliable
The protection level of the transmission system of the GA+ series
compressor reaches IP66, preventing dust and
The erosion of water vapor allows the unit to operate stably under
harsh working conditions (up to 55°C
operating at ambient temperature).
Easy maintenance
All the parts that need regular maintenance are fully considered
the convenience of operation, greatly reducing the
Short maintenance time. The unique box plate design makes all zeros
inside the unit
Parts are all within easy reach. At the same time, the design of
each component also fully considers its maintainability
Compared with the traditional design, the average maintenance time
is shortened by more than half.
Dual set-point and automatic stop
Most production processes create fluctuating levels of demand
which, in turn, can create energy waste in low use periods. Using
the Elektronikon ® unit controller, you can manually or
automatically switch between two difgerent setpoints to optimize
energy use and
reduce costs at low use times. In addition, the sophisticated
algorithm runs the drive motor only when needed. As the desired
setpoint is maintained while the drive motor’s run time is
minimized, energy consumption is kept to a minimum.
Legend
A = Power consumption
B = Time
C = Energy Saving
Components designed for efgiciency
• SmartInjection provides exact amount of oil required to element
ensuring it always works at peak efgiciency.
• High efgiciency IE4 (Fixed Speed) and IE5 (VSD+) motor.
• Integrated energy recovery system recovers up to 78% of energy
from integrated motor and element oil circuit.
• Dual speed or VSD fan for energy efgiciency in lower
temperatures.
Lower life cycle cost
Compressed air is essential in daily industrial production, and its
application fields include
Including: pneumatic tools for cutting, drilling, hammering and
grinding processes;mechanism and valve; ventilation system;
packaging and stacking equipment and conveyor systemsystem etc. GA+
series compressors are designed for lower life cycle cost.
Elektronikon Mk5 Touchscreen Controller
The unique control logic and algorithm of the Elektronikon®
controller can be customized according to different
improve the performance of compressors and after-treatment
equipment. our solution The solution can bring you many benefits,
such as reducing energy consumption, reducing maintenance time time
and cost. Reduce stress on your energy costs, and also on your
operations
More reliable motor
The transmission system with IP66 protection level eliminates the
erosion of dust and water vapor, and ensures the power
The machine can run stably even under harsh working conditions.
Ready-to-install, all-in-one model
The GA+ FF full-featured machine integrates a dryer, and the dew
point of the outlet air can reach 3°C/37°F (20°C
ambient temperature).
The pipes and cables between the compressor and the dryer have been
assembled at the factory, no additional
External installation work, and the compressor control panel can
view and monitor the dew point temperature.
Hybrid
Atlas innovatively integrates the fixed-frequency module and the
variable-frequency module into a hybrid model, which is matched
with our intelligent control system to more accurately match the
gas demand of customers.
Advantages of hybrid models
The hybrid model contains 2 sets of independent drive chains, one
set of fixed frequency drive chains and one set of variable
frequency drive chains. This design has the following advantages:
• Wider frequency conversion range
• Combined operation with lower specific power
• Lower backup costs
• Higher system security
Higher flexibility
The hybrid model can be operated automatically as an inverter, or
as two independent compressors, only one of which is turned on.
This also means that customers can choose a smaller power
compressor as a backup.
High temperature option
Ensuring reliable compressor operation in hot and humid
environments:
• The maximum ambient temperature for fixed frequency machines is
55°C ( 131°F )
• The maximum ambient temperature of the inverter can reach 50°C (
121°F )
Vibration monitoring
The SPM vibration monitoring system can monitor the vibration of
the machine head and motor bearings in real time. The sensor is
directly connected to the Elektronikon® controller, and the
vibration value of each point can be checked in real time.
The alarm/shutdown value of the controller is set at the factory.
Through this system, the failure of the transmission system can be
detected in time, and preventive maintenance can be carried out, so
that the compressor can run safely for a longer period of time.
Built-in dryer
The GA+ FF full-performance model integrates the dryer inside the
compressor. This one-piece design not only reduces installation
space, but also saves piping installation costs. Under typical
operating conditions, the compressed air dew point can reach +3°C
(37.4°F).
Motor Protection Options
Five temperature sensors (PT-1000) are respectively installed on
the front and rear bearings of the main motor and the three-phase
windings.
The temperature at each point can be viewed directly through the
Elektronikon® controller, and the built-in program will protect the
motor of the compressor by alarming or shutting down.
If you have any inquiry, please feel free to contact CEBE GROUP HK
CO.,LTD, the partner of ATLAS in Hong Kong, China.
